Lists the items checked by the installer, such as length of the Oracle home name and whether or not the Oracle home directory already contains another Oracle product. The Oracle Application Server 10 g For the most up-to-date information about hardware and software requirements, refer to Oracle MetaLink :. From the resulting Web page, you can view the latest certifications by product, platform, and product availability. Table lists the system requirements for running Oracle Application Server.
The installer checks many of these requirements at the start of the installation process and warns you if any of them is not met. To save time, you can manually check only the ones that are not checked by the installer. Refer to Table to see which requirements are not checked by the installer.
You can also run the system checks performed by the installer without doing an installation, by running the runInstaller command as shown. The results are displayed on the screen as well as written to a log file. For more information about the types of checks performed, refer to Section 4. The computer's IP address can be static. Processor type. Processor speed. The memory requirements provided for the various installation types represents enough physical memory to install and run Oracle Application Server.
However, for most production sites, you should configure at least 1 GB of physical memory. For sites with substantial traffic, increasing the amount of memory further may improve your performance.
For Java applications, you should either increase the maximum heap allocated to the OC4J processes, or configure additional OC4J processes to utilize this memory. To determine the optimal amount of memory for your installation, the best practice is to load test your site.
Resource requirements can vary substantially for different applications and different usage patterns. In addition, some operating system utilities for monitoring memory can overstate memory usage partially due to the representation of shared memory. The preferred method for determining memory requirements is to monitor the improvement in performance resulting from the addition of physical memory in your load test.
Refer to your platform vendor documentation for information on how to configure memory and processor resources for testing purposes.
The installer checks the amount of memory on your computer and will warn you if your computer does not meet the minimum memory requirements. These values assume you are running only one Oracle Application Server instance per computer.
If you plan to run multiple instances on the same computer, refer to Section 4. You can install the data files for the OracleAS Metadata Repository database on a disk that is different from the disk where you are installing OracleAS Infrastructure.
If you do this, make sure the disk for the data files has at least 1. The installer may display inaccurate disk space requirement figures. Refer to these values for disk space requirements. Replace dir with the Oracle home directory or with the parent directory if the Oracle home directory does not exist yet.
Refer to Section 4. If necessary, refer to your operating system documentation for information about how to configure additional swap space. Oracle Enterprise Manager 10 g is supported on the following browsers:. Mozilla 1. Firefox 1. For the most current list of supported browsers, check the Oracle MetaLink site:. Checked by Installer: No. However, if you access Oracle Enterprise Manager 10 g using a non-supported browser, you will get a warning message.
If you plan to run OracleAS Infrastructure and a middle tier on the same computer, ensure the computer meets the memory requirements listed in Table Note that these values have been tested against a small number of users.
If you have many users, you might have to increase the amount of memory. After installation, start up only the components that you need. Run Application Server Control only when you need to administer an instance. In most cases, you do not need Application Server Control running all the time. If you are running multiple Oracle Application Server instances on one computer, each Application Server Control can consume a lot of memory.
Running Application Server Control only when you need it can free up memory for other components. Configure Application Server Control so that it can manage multiple instances. Table lists the software requirements for hp Tru64 UNIX systems and the procedure that follows the table describes how to ensure your system meets these requirements and any additional requirements for installing Oracle Application Server.
Note: There may be more recent versions of the patches listed installed on the system. If a listed patch is not installed, then determine whether a more recent version is installed before installing the version listed. In this example, the version shown is V5.
If necessary, refer to your operating system documentation for information about upgrading the operating system. To determine whether the required software subsets are installed, enter one of the following commands:. To determine whether a particular software subset is installed, enter a command similar to the following:.
If this command does not display the identifiers shown in the previous table for the required patch kits or the identifier for a later patch kit level , then download and install the latest patch kit from the following Web site:. A special version of Motif 2. For information on downloading the required version of Motif, refer to:.
The computers on which you plan to install OracleAS Metadata Repository or OracleAS Web Cache require their kernel parameters to be set to the minimum values listed in the following sections:. Run the following command to check that the nofile kernel parameter is set to at least Verify that the kernel subsystem attributes shown in the following table are set to values greater than or equal to the recommended value shown.
The procedure following the table describes how to verify and set the values. Footnote 1 The maximum value supported by Oracle for this parameter is MB. To view the current value specified for these kernel subsystem attributes, and to change them if necessary, follow these steps:. To view the current values of the subsystem attributes, enter commands similar to the following:. If you must change any of the current values, follow these steps:.
Using any text editor, create a file similar to the following, specifying the subsystems and attributes that you want to modify:. In this example, filename is the name of the file you created in step b. Enter the following command to reboot the system:. To improve the performance of the software on hp Tru64 UNIX systems, you must increase the following shell limits for the oracle user, depending on the user's default shell:. You can have the installer assign default port numbers, or use port numbers that you specify.
Port is the default port because on UNIX, components that use port numbers lower than require additional steps to be performed as the root user before the components can run. Because the installer does not have root access, it has to use a port greater than If you want Oracle HTTP Server to use a different port, such as port 80, use the "static ports" feature, which enables you to specify port numbers for components.
Although you can change the port number after installation, it is easier to set the port number during installation. If you want to use the default port numbers for components, you do not have to do anything. Make sure that at least one port is available in the port range for each component.
If the installer is unable to find a free port in the range, the installation will fail. These happen to be the default ports for Oracle Internet Directory.
To comment out a line, add a at the beginning of the line, as shown:. It assigns a number from the port number range for Oracle Internet Directory. Create a file containing the component names and port numbers. This file is typically called the staticports.
In the installer, on the Specify Port Configuration Options screen, select Manual and enter the full path to the staticports. If you do not specify the full path to the file, the installer will not be able to find the file.
The installer will then assign default ports for all the components, and it will do this without displaying any warning. The staticports. The easiest way to create the file is to use the staticports. You do not need to specify port numbers for all components in the staticports. If a component is not listed in the file, the installer uses the default port number for that component. You cannot change the port used by the OracleAS Metadata Repository port during installation, but you can do so after installation.
For components not specified, the installer will assign the default port numbers. If you use a port number less than for a component, you must run the component as the root user.
If you use a port number less than for a component, the installer will not be able to start up the component at the end of installation. You may need to configure the component first before you can start it up.
Refer to the corresponding component documentation for details. The installer verifies that the ports specified in the file are available by checking memory. This means that it can only detect ports that are being used by running processes.
It does not look in configuration files to determine which ports an application is using. If the installer detects that a specified port is not available, it displays an alert. The installer will not assign a port that is not available. To fix this:. Edit the staticports. Click Retry. The installer re-reads the staticports. If you have installed Oracle Application Server and you want to use the same port numbers in another installation, you can use the portlist.
However, note this difference: in staticports. Check your staticports. Here are some things that you should check:.
If you specify the same port for more than one component, the installer will use the specified port for the first component, but for the other components, it will use the components' default ports.
The installer does not warn you if you have specified the same port for multiple components. If you specify different ports for one component on multiple lines, the installer assigns the default port for the component.
The installer does not warn you if you have specified different ports for one component. If you specify the same port for one component on multiple lines, the installer assigns the default port for the component.
The installer does not warn you if you have specified the same port on multiple lines. If you have syntax errors in the staticports. For the components specified on such lines, the installer assigns the default ports. After you complete an upgrade of OracleAS Infrastructure in an OracleAS Farm, the pre-upgrade instance of the infrastructure still remains in the farm.
Specifically, the pre-upgrade instance continues to show up on the Farm page in the Application Server Control Console. There is currently no way to remove the pre-upgrade instance. The remaining instance will not cause any operational problems with the upgraded infrastructure. If this problem occurs, do not exit Oracle Universal Installer. Instead, leave the program running and perform the following workaround in a separate window:.
Using a text editor, open the following file in the Oracle home of the replica you are upgrading:. If you experience problems or issues while upgrading a particular application server component, refer to the component chapter in these release notes for more information. If OracleAS Portal is not configured in the source oracle home, it remains unconfigured after the upgrade to 10g Release 2 Note that you can choose to configure the OracleAS Portal after upgrading the middle tier or at the end of the entire upgrade process, after upgrading the OracleAS Metadata Repository.
Update the following port values in the ptlem. Run ptlconfig command to associate the OracleAS Portal repository with the upgraded middle tier, as follows:.
Modify the port entries in the ptlem configuration file, as described previously in this section. You can obtain the required port numbers from the Ports page in the Application Server Control Console. Run the ptlconfig command to associate the OracleAS Portal repository with the upgraded middle tier, as follows:.
Upgrading Oracle Application Server from 9. If this occurs, you must use the Order Category window in the Oracle Internet Directory Self-Service Console to reorder your category list following the upgrade process. If you have specified a user-defined configuration file using the envFile parameter in one of the application sections of formsweb. Otherwise, the user-defined configuration files will not be found or upgraded by the middle-tier OracleAS Upgrade Assistant. A seed database is a database that was originally installed and configured automatically by the Oracle Application Server installation procedure.
In most cases, there is no need to manually upgrade a seed database, except as part of an overall upgrade of the OracleAS Infrastructure components. However, it is possible to manually upgrade an Oracle Application Server seed database to a newer database version without upgrading your Oracle Application Server environment.
When you finish upgrading the database, it is no longer referred a seed database; instead, it is sometimes referred to as a "customer" database.
As a result, this manual upgrade procedure is sometimes referred to as the "seed-to-customer" database upgrade procedure. After upgrade of your seed database to a customer database rdbms install , the DCM daemon in the Oracle Application Server Identity Management instance may not start. The ONS port of the Identity Management instance is already in use by the seed customer database. Note that If you upgrade your seed database to Oracle Database 10g To work around this issue, update the local port file element in the following configuration file to a non-conflicting port value:.
If you have configured geocoding, mapping, or routing providers for Oracle9 i Application Server 9. After the upgrade, you must manually remove all geocoding, mapping, and routing providers using the Application Server Control Console. The ODS password is required when you perform certain Oracle Internet Directory administration tasks, such as when you have to unlock a user account or configure security for the directory.
After you upgrade Oracle Identity Management to 10g Release 2 The section describes documentation errata in installation and upgrade documentation. This parameter is mandatory. The updated text matches the text in the Oracle Database Administrator's Guide. This is incorrect; the Ultra Search must be configured in Oracle Database 9. The compatible parameter must be specified using at least 4 decimal places. For example, "9.
Documentation that is installed with Oracle Application Server 10 g does not use standard file extensions to indicate the applicable language. For example, Chinese files along with any other file that has an underscore in the extension are not picked up. The error occurs in the section on troubleshooting the middle-tier upgrade procedure. The upgrade. However, the version number included in that file is incorrect.
All references to version The copyright date in the Copyright Information help topic incorrectly shows the copyright date range. All rights reserved. The link at the bottom of most of the help topics does indicate the proper trademark date range; it's only the copyright information topic itself that contains the incorrect copyright date range.
In the Oracle Application Server Installation Guide there are two incorrect references to installation media. OracleAS 10g In Section1. Although there are references to Oracle Developer Suite Installing with response files : This method lets you run Oracle Universal Installer at a command line using a response file that contains settings specific to each computer.
Cloning an existing Oracle home : Install Oracle Database in one computer using interactive mode. Afterwards, you can clone its existing Oracle home in each location and then create a new database from there.
You can also clone databases, which is described in Oracle Database Administrator's Guide. How do I configure client connections to an Oracle database? If you have many client nodes, consider staging the software centrally, mapping the drive, and running Oracle Universal Installer in noninteractive mode.
If you have many client nodes, then consider running Oracle Universal Installer in noninteractive mode. How do I upgrade Oracle Database? If you want to run a single-instance Oracle Database in a clustered environment, then install Oracle Clusterware either before or after you install Oracle Database.
If you want a consolidated pool of storage for all databases in a cluster, then install Oracle Clusterware first and use Automatic Storage Management to manage this storage. Afterwards, install Oracle Database which can be either single instance or Real Application Clusters. Oracle Clusterware is available on the Oracle Clusterware installation media. Oracle Clusterware is an integrated cluster management solution that can bind multiple servers together to act as a single system referred to as a cluster.
It performs workload management and component restart. For example, when an instance supporting a particular service fails, Oracle Clusterware restarts the service on the next available instance that you have configured for that service. How do I migrate my non-Oracle databases to Oracle Database? Oracle Migration Workbench software and documentation are available at:.
Does Oracle Database provide data mining tools that I can use to discover hidden meaning in my data and predict likely outcomes based on my data? How do I install Oracle Application Server?
How you install Application Server depends on whether you already have Oracle Database installed:. This database is populated with the metadata that Oracle Application Server needs in order to run. How can I administer and monitor my Oracle Database products? To perform regular administrative functions such as creating, configuring, or deleting databases, or managing database templates, use one of the following methods:.
You can also administer and monitor the database with Oracle Enterprise Manager Grid Control, which is installed by default with Oracle Database. Oracle Enterprise Manager Grid Control includes the Oracle Management Agent, Oracle Management Service, and Oracle Management Repository, as well as Grid Control, a browser-based central console through which administrators can perform all monitoring, administration, and configuration tasks for the enterprise.
To perform advanced administration tasks, such as monitoring Oracle Database and managing multiple hosts, application servers, and databases including the one that you are installing, install Oracle Enterprise Manager as follows:.
Oracle provides a wide range of security solutions for your enterprise environment, including centralized administration and security features integrated with Oracle Internet Directory.
0コメント