Use another finger in this case. It is recommended that you register more than 2 fingerprints. Hold the [CLR] button for over 2 sec. If not, it goes out of this setting mode and the initial screen appears. Time Setting 6. Page 21 3. Card Reader 4. Wiegand 6. Initialize 1. Init Config 2. Delete Log 3. Page 23 Input password. Page 25 After both card and fingerprint are registered, authentication method is selectable during ID and fingerprint authentication or card and fingerprint authentication.
Page 26 If a user feels difficult in inputting ID, a card can be used instead of ID input for authentication. Page 29 Press [0] to see menus not shown in the LCD 2. Add FP window. By using the button [0], you can scroll the unseen menu. In case of dynamic IP, there is no need for additional settings.
Page 36 If double authentication or more for each time period is required, place a finger or a card for authentication while pressing [ENTER]. Application Press [3] for door settings. Verify Option 3. Set Doorlock 4.
To exit from this setting, press [CLR] to move to the upper menu. Therefore, be careful to give serious consideration before modifying the ID length. Page Terminal Initialization To initialize configuration settings, press [1]. For card authentication, press the corresponding function key and then place the card close to the terminal.
Page ] Fingerprint Authentication In case of authentication failure Non-registered user ID During authentication request to the authentication server, network trouble occurred or network line was disconnected. Page Password Authentication In case of authentication failure Non-registered user ID During authentication request to the authentication server, network trouble occurred or network line was disconnected.
The door LED turns off and door relay is back again after the door open setting time has elapsed. Page Multiple Fingerprint Authentication LED turns off and door relay is back again after the door open setting time has elapsed. Page 1:N] Fingerprint Authentication When authentication is successfully done, a success message appears. Page 63 If authentication is successfully done, a success message is displayed.
Print page 1 Print document 63 pages. Delete Log 3. Page Modifying User To change this value, press the [ ] to delete the current value and enter the new value. Page Delete All Users Special care is required because all user accounts, including the administrator, are deleted with this operation. The authentication operation is done only on the network server. Verify Option press [2]. Set Doorlock 4. Sound Control 5. Page 36 This enables fingerprint authentication without inputting a user ID, or using a card.
Page Volume Settings Press [4] for volume settings. Verify Option 3. Other Setting 3. Page 42 Number of current users registered to a terminal including All User administrators.
All Admin Number of administrators registered to a terminal. Page Extra Functions 3. Page Device Settings 3. Page Card Reader Settings 1:N fingerprint authentication is not performed except for the auto sensing setting. Page Fingerprint Sensor Settings level.
Page 47 When setting the fake fingerprint level to 0, security levels are comparably low. If 3, security level is the highest. Page Wiegand Output Settings 1. Set Fn-Key Press [5] for system configuration settings. Card Reader 3. FP-Sensor 4. Wiegand 5. System Config 6. If not, press [2]. Fingerprint authentication through auto sensing; without pressing any keys. This authentication is performed in the mode displayed on the screen. Page 54 Non-registered user ID.
During authentication request to the authentication server, a network problem occurred or the network was disconnected. Page 56 This iterative process continues until all three fingerprints are authenticated. Page N] Fingerprint Authentication - If more than 5 working modes - start, leave, not in work out , return back and normal - are required, it can be expanded up to 41 modes.
Page 59 When authentication is successful, a success message appears. Print page 1 Print document 59 pages. Rename the bookmark.
0コメント